Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Temple City, CA
Flint Chimney Company handles chimney cleaning, inspection, and repair for Temple City homeowners, and the work here follows a pattern we see across the San Gabriel Valley. Most of the chimneys we service in Temple City sit on single-story ranch homes built between the 1940s and 1960s, with original brick or stone masonry and clay tile liners that were never designed for decades of seasonal burning. Add in mild, wet winters and occasional Santa Ana wind events, and the job in Temple City is rarely just a quick sweep. It’s a sweep plus a close look at what moisture and age have done inside the flue. Call (626) 657-5513 and we’ll put the scope and price in writing before any work starts.
Why Temple City Homes Are Different
Temple City’s housing stock skews heavily toward mid-century ranch homes, and that matters for chimney work. The original fireplaces are masonry, built solid, but the flues inside them are typically clay tile, and clay tile cracks as it cycles through heat and cool-down over the decades. Homes north of Las Tunas Drive in particular show this pattern regularly – enough that our technicians look for it on every inspection there. A cracked clay liner lets heat reach the framing around the chimney, and that’s the kind of problem a visual inspection alone won’t catch.
The climate works against these older flues too. Temple City’s winters are mild but damp, and moisture from rain seeps into masonry and accelerates creosote corrosion inside the flue. When Santa Ana winds push dry air through in the fall, homeowners light fires earlier than they might elsewhere, often on top of creosote that’s been absorbing moisture since spring. The result is a cleaning cycle that needs to be respected, not extended. A chimney that would be fine with a two-year interval in a drier climate often needs annual attention here.
The wood-burning culture in this part of the San Gabriel Valley is real. Families in Temple City use their fireplaces for comfort and for gathering, not just for heat. That consistent seasonal use is exactly why regular cleaning matters more here than it does in homes where the fireplace is decorative.
Styles & brands we work with
Our Main Temple City Services
Most Temple City homeowners call us for one of three jobs: a standard chimney sweep before burning season, a camera inspection on an older home, or a repair on a flue that’s showing its age. Each service has its own page with local detail, pricing, and what to expect.
Chimney Sweep in Temple City
A standard chimney sweep in Temple City removes creosote and soot from the flue and smoke chamber, and on these older ranch homes, we’re also looking for the early signs of cracked clay tile. Moisture from Temple City’s wet winters makes creosote cling harder to flue walls, so a sweep here often takes longer than on a newer home. We protect the hearth and surrounding floor before the brushes come off the truck, and the job ends with a written report of what we found. Full details are on the Chimney Sweep in Temple City page.
Chimney Inspection in Temple City
On a Temple City home built in the 1950s or early 1960s, a chimney inspection is the only way to know what’s happening inside the flue before you light the first fire of the season. We run a camera up the chimney and look for cracked clay tile, deteriorated mortar joints, and creosote that’s hardened into a glaze. Homes north of Las Tunas Drive account for a disproportionate share of the cracked-liner findings we see, which is simply a function of housing age and original materials. See what the inspection covers and when Temple City homeowners should schedule one on the Chimney Inspection in Temple City page.
Chimney Repair in Temple City
When a Temple City chimney needs repair, the most common jobs are flue relining (replacing the inner liner that channels smoke safely out of the house) and mortar crown repair at the top. We specify materials by the job, not by margin, and work with professional-grade products like DuraFlex for stainless liners and HeatShield for resurfacing damaged clay tile. Every repair we do in Temple City carries the 365-Day Done Right Promise, a written guarantee valid for one full year. If a covered repair fails, we return at no charge. The full repair scope and process is on the Chimney Repair in Temple City page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Temple City
We install and work with professional-grade chimney products including DuraFlex, HeatShield, Gelco, and Olympia Chimney. On Temple City jobs, we commonly spec DuraFlex stainless liners for relining and HeatShield for resurfacing clay tile that’s cracking but still sound. Parts are stocked at our Los Angeles coordination office, which keeps turnaround tight for Temple City appointments. See our brands for the full list and why we choose them.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Temple City, CA
| Service | Typical Range in Temple City |
|---|---|
| Standard chimney sweep (Level 1) | $180 – $300 |
| Chimney sweep with heavy creosote / glaze buildup | $280 – $450 |
| Level 2 camera inspection | $250 – $400 |
| Level 3 inspection (after chimney fire or structural concern) | $1,200 – $2,500 |
| Flue relining with stainless steel (DuraFlex) | $2,500 – $5,000 |
| HeatShield resurfacing of clay tile liner | $2,000 – $3,800 |
| Mortar crown repair or rebuild | $400 – $950 |
| Chimney cap installation | $200 – $500 |
What pushes a Temple City job toward the upper end of these ranges is usually chimney age and liner condition. A 1960s ranch with original clay tile that has cracked in multiple places will cost more to reline than a chimney with a single problem spot. Whatever the number ends up being, you’ll see it in writing before any work starts, and the invoice will match it. That’s The Garrison Standard, and we don’t run a job without it.
Neighborhoods We Serve in Temple City
We cover all of Temple City, including the neighborhoods north and south of Las Tunas Drive, the areas around Temple City Park, and the residential blocks east of Rosemead Boulevard. Response time across the city runs one to three business days for most appointments.
- North Temple City (north of Las Tunas Drive)
- South Temple City
- Areas around Temple City Park
- East Temple City (east of Rosemead Boulevard)
Service Area – Cities Near Temple City
Our crews cover Temple City and the surrounding San Gabriel Valley communities. If you’re in a neighboring city, we service El Monte, CA, San Gabriel, CA, Arcadia, CA, and Rosemead, CA as well. Each city page has local pricing and service details specific to that area.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Temple City
Most Temple City appointments are scheduled within one to three business days. During the fall rush before burning season, the window can stretch to a week. Call (626) 657-5513 and a live person will give you the next available slot, not a voicemail tree.
Routine chimney sweeping and camera inspections do not require permits in Temple City. Structural repairs like a full flue relining may, depending on scope. We’ll tell you during the estimate if your job needs one, and we handle the paperwork on our end where it’s required.
Yes. We service every neighborhood in Temple City, from the homes north of Las Tunas Drive down to the southern residential blocks. Scheduling and dispatch are coordinated from our Los Angeles office, and crews serve Temple City locally. Call for a free estimate at (626) 657-5513, and you’ll get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R."Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H.